|
|
Wiha 38027
BitFlip 8 in 1 Magnetic Screwdriver Set
Slotted/Phillips/Torx
New from Wiha 38027 Magnetic Screwdriver has Ergo cushion grip
handle with rapid access flip out eight bit tray. Bit tray flips out and
turns bits toward you for quick and easy access. Hardened tool steel shaft with powerful permanent rare earth magnet. Bits are made of premium
CRM-72 tool steel, through hardened for reliable performance. Bits
have precision machined exact fit tips.
Made in Germany. Blade length 5" overall 9-1/2"
Wiha 38027 includes 8 bits:
Slotted
3/16", Slotted 1/4", Phillips #1, Phillips #2,
Torx T10, T15, T20, T25
Click Here for more Wiha BitFlips
|
| DESCRIPTION |
SIZE |
PART# |
LIST |
SPECIAL |
Wiha 38027
BitFlip
Set with Slot/Ph/Torx |
|
38027 |
$31.46 |
$19.69 |
|
|
Wiha 38018
Insulated (1000 Volt Certified)
BitFlip 8 in 1 Magnetic Screwdriver Set
Slotted and Phillips
Wiha 38018 insulated Magnetic Screwdriver has Ergo cushion grip
handle with rapid access flip out eight bit tray. Bit tray flips out and
turns bits toward you for quick and easy access. Hardened tool steel shaft with powerful permanent rare earth magnet. Bits are made of premium
CRM-72 tool steel, through hardened for reliable performance. Bits
have precision machined exact fit tips.
Made in Germany. Blade length 5" total 9-1/2"
Wiha 38018 includes 8 bits:
Slotted
3/16, 7/32, 1/4, and 5/16"
Phillips #0, #1, #2 and #3
Click Here for more Wiha BitFlips
|
| DESCRIPTION |
SIZE |
PART# |
LIST |
SPECIAL |
Wiha 38018
BitFlip
Set with Slotted & Phillips |
|
38018 |
$33.72 |
$23.20 |
|
|
Wiha 38043
Stubby 6 in 1 Magnetic Driver
Slotted/Phillips/Pozi
Wiha 38043 is perfect for working in tight limited access applications.
Stubby bit holder with soft grip handle. Easy snap cap for quick bit
access. Powerful permanent rare earth magnet. Bits are made of premium
CRM-72 tool steel, through hardened for reliable performance. Bits
have precision machined exact fit tips.
Wiha 38043 includes 6 bits:
Slotted
3/16, 1/4"
Phillips #1, #2
Pozidriv #1,
#2
Click Here for more Wiha Stubby 6 in 1 Magnetic Drivers
Made in
Germany |
| DESCRIPTION |
SIZE |
PART# |
LIST |
SPECIAL |
Wiha 38043
Stubby bit
Set with Slot/Ph/Pozi |
|
38043 |
$20.98 |
$12.99 |
|
|
Oetiker 1098 Clamp Pliers 14100082
Standard Jaw Pincer
Oetiker 1098 Standard Jaw Pincer
# 14100082
For use where radial access to clamp is not restricted.
Made in Germany.
Oetiker 1098, 14100082 Clamp Pliers, Standard Jaw Pincers
Click here for more information on
Oetiker 1098 Clamp Pliers.
|
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Oetiker 1098
Clamp Pliers
14100082 |
8-3/4" |
OE1098 |
$26.30 |
$24.20 |
|
|
Oetiker 1099 Clamp Pliers
14100083, 1099i
Dual Purpose Side Jaw Pincer
Oetiker 1099 Dual Purpose Side Jaw
Pincer # 14100083
For use where space is restricted. Dual purpose side jaw design allows clamps to be
applied or removed in confined areas. Can be used parallel or perpendicular to the application.
Made in Germany.
Oetiker 1099, 1099i, 14100083 Clamp Pliers, Side Jaw Pincers
Click here for more information on
Oetiker 1099 Side Jaw Pincer.
|
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Oetiker 1099
Clamp Pliers
14100083 |
8-3/4" |
OE1099 |
$31.35 |
$26.20 |
|
|
Wera KK 25 with Pouch 0501024002
Bit Holding Screwdriver w/Removable Bayonet
Wera Kraftform Kompakt 25 has removable two-position telescopic
blade that retracts into the handle. Integrated bit magazine with press button opening
holds six bits. Bits included: Slotted 3/16", 7/32", 1/4", Phillips #1, #2 and #3.
Wera Kraftform Kompakt 25 Bit Holding Screwdriver 0501024002
Click here for more information on
Wera KK 25
|
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Wera KK 25
Kraftform Kompakt 25
0501024002 |
7 in 1 |
KK25 |
$49.90 |
$29.20 |
|
|
|
Wera 8000-B
8000B, 05003550002
Zyklop 3/8" Drive Ratchet
Wera
8000-B Zyklop 3/8" Drive Ratchet
is unbelievably fast and incredibly flexible. Wera Zyklop ratchets combine five different types
of ratchets in one, and you can even use it as a screwdriver.
1. Fine-tooth ratchet (72 teeth return angle of 5°)
2. Flex-head ratchet
3. Angle ratchet
4. Quick-release ratchet
5. Power ratchet
6. Screwdriver (with optional 1/4" bit adaptor)
At 0° the ratchet easily rotates at a high speed for faster work than conventional ratchets.
Kraftform handle and the spin sleeve accelerate the screw-driving process.
The Zyklop’s swivelling ratchet head performs the function of a flex head ratchet enabling the user to reach
even difficult-to-access screw positions. The defined lock positions at 0°, 90° and 15° (from 90° position) ensure reliable work
without any slipping of the ratchet head. Sliding switches mounted on both sides enable unlocking in every position.
Push button ball release for locking extensions and adaptors.
Comfortable Kraftform handle for comfort and torque.
Wera 8000B, 8000-B, 05003550002 Zyklop 3/8" Drive Ratchet.
Click here for more
Wera Zyklop Ratchets
|
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Wera 8000 B
Zyklops 3/8" Drive
05003550002 |
7-1/2" |
8000B |
$99.00 |
$67.10 |
|
|
|
Wera Koloss 8002 C
05003692002, 8002C
Koloss 1/2" Drive Ratchet with Hammer Function
Wera Koloss 8002 C Heavy-Duty 1/2" Ratchet is the first ratchet in the world that can
be safely used as a hammer. Heavy-Duty double pawl mechanism and a return angle of 6° allow you to tighten and loosen
screws quickly and accurately even in cramped conditions. Best of all, no impact-absolutely no impact-can destroy the
ratchet mechanism. Push-through 1/2" square drive for forward and reverse operation, tubular shaft to
minimize impact
vibrations, drop-forged hammer head pinned to shaft in form-fit joint, dry-fined striking face. Multi-component handle
for optimum pressure, impact and tensile loads; handle end contains adaptor for Koloss Extension 8780 C and Koloss
Centering Pin 8781 C. Comes with belt holster and protective pad that simply attaches to the striking face to soften
hammer blows.
Overall length 13-1/2".
Wera Koloss 1/2" Drive Ratchet with Hammer Function 05003692002
Click here for more information on
Wera Koloss 8002 C
|
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Wera Koloss
Ratchet with Hammer
05003692002 |
1/2" |
8002C |
$129.49 |
$109.10 |
|
|
Knipex
95 61 190 9561190, 9561-190
Wire Rope Cutter
KNIPEX 95 61 190 For medium hard wire cables up to 15/64" (6mm) in
diameter such as Bowden cords, but also for cables and steel rods.
Special blade geometry prevents wire cable splaying and allows for burr
free cutting. Comfortable work thanks to handy, slim design and internal
opening spring. Screw joint for precise blade guidance, re-adjustable.
High leverage for reduced effort. Chrome vanadium heavy-duty steel,
forged and oil hardened. Made in Germany.
Knipex 95 61 190 cutting edges
are additionally induction hardened to approx. 64HRc. New style with
two crimping dies for end caps on Bowden cables and end ferrules for
wire rope hoists.
Knipex 95 61 190, 9561190, 9561-190 Wire Rope Cutters.
Click Here for more information |
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 95 61 190
Wire Rope Cutters |
7-1/2" |
KN 95 61 190 |
$65.20 |
$43.40 |
|
|
Knipex
95 62 190 9562190, 9562-190
Wire Rope Cutter with Comfort Grips
KNIPEX 95 62 190 For medium hard wire cables up to 15/64" (6mm) in
diameter such as Bowden cords, but also for cables and steel rods.
Special blade geometry prevents wire cable splaying and allows for burr
free cutting. Comfortable work thanks to handy, slim design and internal
opening spring. Screw joint for precise blade guidance, re-adjustable.
High leverage for reduced effort. Chrome vanadium heavy-duty steel,
forged and oil hardened. Made in Germany.
Knipex 95 62 190 cutting edges
are additionally induction hardened to approx. 64HRc. New style with
two crimping dies for end caps on Bowden cables and end ferrules for
wire rope hoists.
Knipex 95 62 190, 9562190, 9562-190 Wire Rope Cutters.
Click Here for more information |
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 95 62 190
Wire Rope Cutters |
7-1/2" |
KN 95 62 190 |
$69.55 |
$47.10 |
|
|
Knipex
87 01 125
Cobra Pliers 5"
The
new KNIPEX 8701125 is a miniature version of the very popular and world
class Knipex Cobra Pliers. Small size for improved accessibility in very
confined areas. Professional tool for fine mechanical applications.
Excellent for precision mechanics, electropneumatics, bicycles, model
building, handicrafts, assembly of furniture, fittings etc.. Knipex 87 01 125 has
13 adjustment positions for comfortable handle position.
Large gripping capacity up to 1".
Click Here for more information.
Made in Germany. |
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 87 01 125
5" Cobra Plier |
5" |
KN 8701 125 |
$37.84 |
$22.71 |
|
|
Knipex 86 03 150
Plier Wrench 6"
The
new KNIPEX 8603150 is a miniature version of the very popular and world
class Knipex Plier Wrench. Heavy duty, small professional tool for
precision work with screws. Quality and operation features are the same
as those in the large pliers wrench. Stepless gripping of all widths
across flats up to 27mm (1"). Zero backlash jaw surface pressure prevents
damage to edges of sensitive components. Ratchet-action gripping jaws allow
fast tightening and releasing of screw connections.
14 adjustment positions for user-friendly handle position.
Knipex 86 03 150 has a jaw capacity of 1".
Click Here for more information.
Made in Germany.
|
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 86 03 150
6" Plier Wrench |
6" |
KN 8603 150 |
$63.20 |
$36.30 |
|
|
Knipex 71 21 200
Bolt Cutters
Head Angled 20° and Single Sided Joint Bar
Knipex 7121200 is similar to
7101200
20° angled with single sided joint bar and diagonal cutting
edge for flush cutting; with space for gripping.
Lever Action provides exceptional cutting performance with little effort for piano wire, soft solid wire, bolts, nails,
chain link fence, rivets and screws. Vanadium electric oil hardened steel and inductive hardened edges provide 64HRc edge hardness.
Knipex 71 21 200
Cuts 6mm Soft Wire, 5.2mm Nails and Medium Hard Wire, 4mm Hard Wire and 3.6mm
Piano Wire. Made in Germany
Click here for more
information |
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 71 21 200
8"
Bolt cutters w/Angled Head |
8" |
KN 7121 200 |
$67.72 |
$47.20 |
|
|
Knipex 95 61 150
Wire Rope Cutters For Soft Wire & Small Bowden Cables with Maximum
Diameter 3mm
For Bowden cables and soft wire
rope up to 3mm Diameter. Smooth and clean cutting due to special
shape of the cutting edges. Knipex 95 61 150 s sickle shaped cutting edges surround
the material and prevent the wire rope from fanning out. Little
hand force required due to very high transmission ratio. Includes
opening spring and locking lever. Cutting edges additionally induction
hardened.
Made in Germany. Knipex 95 61 150, 9561150, Wire Rope Cutter.
Click here
for more information |
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 95 61 150
Wire Rope Cutters 6" |
6" |
KN 9561 150 |
$40.06 |
$25.20 |
|
|
Knipex 79 02 120
Ultra Precision Diagonal Cutters
Precision pliers for ultra fine cutting work, e.g. in electronics and fine mechanics. Precisely ground, sharp cutting edges with very small bevel for exact cutting on delicate components. Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC. Joint with screw: precise, zero backlash operation of pliers. Precisely finished joint surfaces for smooth, low friction movement along the complete opening range. Low-friction double leaf spring- for gentle and even opening. Non-reflective finish. Low weight. Ergonomically shaped two-color dual component handles blue/grey. High quality ball bearing steel, forged. Made in Germany.
Click for
more information |
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 79 02 120
Ultra Precision Cutters |
4-3/4" |
KN7902-120 |
$75.20 |
$49.32 |
|
|
Knipex
95 32 060 9532060, 9532-060
Ratcheting Cable Shears w/Telescoping Handles
Knipex 95 32 060 Ratcheting Cable Shears for copper and single conductors as well as multiple
stranded cables- also with hard rubber or plastic sheath.
Suitable for cables with iron sheath reinforcement.
Not suitable for steel wire and wire ropes.
Little hand force required for cutting due to optimum transmission ratio.
High cutting capacity due to two-hand operation and ratchet action.
The blade can be opened in any cutting position. cable diameters up to
60mm. MCM 1400. Comfortable work thanks to ratchet
action and low weight. Heavy duty telescopic handles made of oval
aluminum tubing, extendable to 600mm for maximum leverage on large cable
diameters; retractable down to 400mm for minimum space requirements
during transport. Replaceable cutting head.
Knipex 95 32 060, 9532060, 9532-060 Ratcheting Cable Shears.
Click Here for more Cable Cutters.
|
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Knipex 95 32 060
Cable Shears |
400 to 600mm |
KN 95 32 060 |
$1,079.26 |
$755.40 |
|
|
Knipex 95 32 038 9532-038, 9532038
Ratcheting Cable Shears w/Telescoping Handles
Knipex 95
32 038 Ratcheting Cable Shears for cable diameters up to 38mm. Shanks
can be positioned at an angle to set the optimum handle width, also
suitable for work in confined areas. Comfortable work thanks to ratchet
action and low weight. Heavy duty telescopic handles made of oval
aluminum tubing, extendable to 770mm for maximum leverage on large cable
diameters; retractable down to 570mm for minimum space requirements during transport.
Replaceable cutting head. Neater cut due to optimized cutting-edge
geometry. Adjustable screw joint.
Click here for more information
Knipex 95 32 038, 9532038, 9532-038 Ratcheting Cable Shears. |
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 95 32 038
Cable
Shears |
570 to 770mm |
KN 95 32 038 |
$380.30 |
$285.22 |
|
|
Vim ®Miniature Open-End Wrench Set
Vim Miniature Open-End Wrenches are perfect for miniature fasteners found in many electrical, mechanical and computer components. All wrenches are made in the U.S.A. of high alloy steel, heat treated, and chrome plated. Wrench openings are accurately machined with 15° and 60° openings, duplicated for each size. Includes wrenches: 13/64"+ 15/64", 15/64"+ 13/64", 7/32"+ 1/4", 1/4"+ 7/32", 9/32"+ 5/16", 5/16"+ 9/32", 11/32"+ 3/8", 3/8"+11/32" in vinyl tool roll.
Click here for more
Miniature Wrenches |
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Vim® Miniature
Open-End
Wrench Set |
8 PC |
V18 |
$27.25 |
$21.30 |
|
Boa®
Aluminum Versa Saw
Best described as a frameless hacksaw.
Its unique pistol grip shape with no upper frame allows you to saw into
and around different and difficult places. Spring loaded blade gives a
pump action for smooth one handed use.
.
Boa®
Plastic Versa SawHolds 10" or
12" hacksaw blades. Supplied with high quality 10" Bi-Metal 24 TPI blade
(pictured).
Click for
more information |
| DESCRIPTION |
Blade Size |
PART# |
REG |
Special |
Boa BO 16004
Aluminum Versa Saw |
10" |
BO16004 |
$28.50 |
$25.50 |
|
Boa BO 16001
Plastic Versa Saw |
10" |
BO16001 |
$13.50 |
$12.25 |
|
Knipex 94 10 185
PVC Pipe Cutter
Knipex 94 10 185 PVC Pipe Cutter For clean cutting of plastic pipes with 6-35mm (1/4"-1-3/8")
diameter. Blade is replaceable and can be retracted in any position. Low
force requirements due to special blade geometry and optimum
transmission. Minimum operator fatigue due to ergonomic handle design
and ratchet blade feed in stages. Die-cast aluminum body, red lacquered.
Made in Germany.
Click here for more information |
|
DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Knipex 94 10 185
PVC Pipe Cutter |
7" |
KN 9410 185 |
$95.20 |
$64.60 |
|
|
Spare Blade for PVC Pipe Cutter |
|
KN9419-185 |
$34.32 |
$27.10 |
|
|
RENNSTEIG®
Double-Edged Screw Extractors
Rennsteig's patented double-edged (left or right turning)screw extractors are made from hardened chrome vanadium steel with a burnished finish. The cutting edges are polished, and the part number and dimensions are laser marked on the shank for easy identification. RENNSTEIG is a German manufacturer who makes punches, chisels, and screw
extractors. Since 1991 they have been a subsidiary of Knipex.
RNSE5 5 piece set for screw sizes 3/16"-3/4". Made in
Germany |
| DESCRIPTION |
Sizes |
PART# |
LIST |
YOUR
COST |
|
Double-Edged
Screw Extractor Set |
1 thru 5 |
RNSE5 |
$53.20 |
$34.30 |
|
|
Knipex 90 55 280
Sheet Metal Nibbler
Knipex 90 55 280 For cutting iron,
copper or aluminum plate up to max. 1.2mm thickness.
Materials are cut without deformation. Clean cut edges- no additional
work needed on the cut profile. Chip breaker allows notching and chip
breaking in one operation. High strength special steel, particularly
stressed parts oil-hardened and tempered. Made in Germany |
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Knipex 90 55 280
Sheet
Metal Nibbler |
11" |
KN 9055 280 |
$82.46 |
$59.50 |
|
|
Spare Blade for Sheet Metal Nibbler |
|
KN 9059 280 |
$20.14 |
$17.10 |
|
|
Knipex 87 41 250
Raptor Wrench Plier 10"
KNIPEX
8741250 Multiple Slip Joint Spanner is a combination tool that offers
the convenience of the comfortable push-button adjustment on the
work piece and the function of an adjustable spanner. Knipex 87 41 250 s
zero backlash pressure of the jaws avoids slipping on the threaded connection or a
rounding effect on the edges. Even rounded edges and heavily coated work
pieces that do not offer a convenient gripping surface to conventional
wrenches, can be loosened with the exceptionally powerful gripping jaws
of the Multiple Slip Joint Spanner. Made in Germany. |
| DESCRIPTION |
SIZE |
PART# |
LIST |
YOUR
COST |
Knipex 87 41 250
Raptor
Wrench Plier |
10" |
KN 8741 250 |
$46.30 |
$27.20 |
|
NEED MORE BLADES?(CLICK
HERE) |
Wiha 28595
Adjustable TorqueControl Tool Set
51 Piece TorqueVario-S Bit Set in Metal Box
Features adjustable TorqueVario-S Handle (10 to 50 inch lbs).
Handle has window scale and makes audible and perceptible click when the
torque setting has been attained. Includes Certificate of Calibration
and Metal Storage Case with die cut foam insert. Made in Germany.
Includes: TorqueVario S Handle #28506, Torque
adjustment tool, 1/4" Bit
Holder and 48 Insert Bits (1/4" Drive)
Slotted: 4.5, 5.5, 6.5, 8mm (3/16", 7/32", 1/4", 5/16")
Phillips: #0, #1, #2, #3
Torx: T6, T7, T8, T9, T10, T15, T20, T25
Hex Inch: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16"
Hex Metric: 1.5, 2, 2.5, 3, 4, 5, 6, 8mm
Pozidriv: #0, #1, #2, #3 Torq Set: #4, #5, #6, #8
Square: #1, #2, #3
Triwing: #0, #1, #2, #3, #4
|
| DESCRIPTION |
Pieces |
PART# |
LIST |
YOUR
COST |
|
TorqueVario-S
51 Piece Bit Set |
51 |
28595 |
$203.82 |
$149.40 |
|
|
Wiha® 32896
31 PC Master Electricians Insulated Set
In Tool Box
| DESCRIPTION |
LENGTH |
PART# |
LIST |
YOUR
COST |
Wiha 32896
31 PC
Master Electricians Insulated Set In Tool Box |
7" |
32896 |
$579.72 |
$339.30 |
|
Insulated
Pliers & Cutters
• Long
Nose Pliers 8"
• Long Nose Pliers 6.3"
• Round Nose Pliers 6.3"
• Lineman's Combo Pliers 9"
• Lineman's Combo Pliers 7"
• Diagonal Cutters 6.3"
• High Leverage Cutters 8"
• Wire Stripping Pliers 6.3"
Insulated Screwdrivers & Nut Drivers
Insulated Slotted: 2, 2.5, 3, 3.5, 4.5, 5.5, 6.5, 8, 10
Insulated Phillips: #0, #1, #2, #3
Insulated Nut Drivers: 5/32-3/16-7/32-1/4-5/16-3/8-7/16-1/2-9/16
Ruler: 6' Folding Fiberglass Re-enforced
Tool Box -
Rugged Waterloo Box |
|
Wiha
SYSTEM 4
INTERCHANGEABLE BLADE SETS
• ESD Safe Collet Lock Precision Handle
• High Quality Interchangeable Blades
•
Made in Germany. Lifetime Warranty.
Slotted & Phillips Blade Set Includes:
3 Double Ended Slotted Blades sizes:
1.5, 2.0, 2.5, 3.0, 3.5, 4.0mm
2 Double Ended Phillips Blades Sizes:
#000, #00, #0, #1
ESD Safe Precision Handle with Collet Lock for adjusting blade length
from 5/8" to 3-3/4" and Canvas Pouch with room for additional blades.
|
| DESCRIPTION |
Pieces |
PART# |
LIST |
YOUR
COST |
|
Wiha 6PC
Slotted & Phillips Blade Set
with Canvas Pouch |
6 |
26991 |
$46.98 |
$35.24 |
|
|
Wiha 6PC
Slotted & Phillips Blade Set with Vinyl Pocket Pouch |
6 |
28091 |
$42.62 |
$32.20 |
|
More System 4 Blade Sets |
Witte 89377 and 89367
WITTRON
Precision Insulated Screwdriver Set
•
• High Quality Precision Blades
•
Made in Germany. Lifetime Warranty.
Slotted & Phillips Set Includes:
Slotted Blades sizes:
1.5, 1.8, 2, 2.5 & 3mm Phillips Blades Sizes: #00, #0
|
| DESCRIPTION |
Pieces |
PART# |
LIST |
YOUR
COST |
Witte 89377
Insulated Screwdriver Set |
7 |
WI 89377 |
$89.90 |
$59.50 |
|
Witte 89367
Insulated Screwdriver Set w/storage box |
7 |
WI 89367 |
$106.00 |
$79.79 |
|
WITTRON Precision Insulated Screwdrivers |
Witte
MAXXPRO
INSULATED SCREWDRIVER SETS
•
• Made in Germany.
Slotted & Phillips 5 Piece Set
#WI653741 Includes:
Slotted 3/32" x 3", 5/32" x 4", 7/32" x 5"
Phillips #1 x 3", #2 x 4"
6 Piece Set #WI653742 adds Slotted 1/4" x 6" |
| DESCRIPTION |
Pieces |
PART# |
LIST |
YOUR
COST |
|
Witte 5PC
Slotted & Phillips Insulated
Screwdrivers |
5 |
WI653741 |
$64.50 |
$47.10 |
|
|
Witte 6PC
Slotted & Phillips Insulated Screwdrivers |
6 |
WI653742 |
$81.50 |
$58.21 |
|
More MAXXPRO Insulated Screwdrivers |
WITTE
WITTRON 89377 Special
|
Crawford Tool • 320 Dividend Drive •
Peachtree City, GA 30269
Tel: 800-272-9373 Fax:770-631-9679 E-Mail |
|
)
)
